Drafting Details of Katori Blouse Step by Step

Last Updated on 15/12/2020

Drafting Details of 3 Piece Katori Saree Blouse

R.S. Balakumar
Associate Professor
Dept of Fashion Design & Arts
Hindustan University, Chennai, India
Email: rsbalakumar1953@gmail.com

 

Katori is a word derived from Hindi means “cup”. This cup part of the bust portion is set appropriately in the front bust portion and give the elegant look to the wearer and also comfort.

In Katori blouse 3-pieces, and 4-pieces are used in each side of the front portion. This is a traditional wear; classical dancers are used to wear this blouse during the dance performance on the stage. Now a day, this blouse is treated as the celebrity collection and famous for wedding collection. Drafting of katori blouse is not a easy task. In this article, I will show drafting part by part.

Katori blouse
Fig: Katori blouse

Mostly, women having the mid bust size 36” and above with B-C-D-DD-cup formation (prominent-bust) will be desired to wear this type of saree blouse. Cine stars mostly prefer to wear this blouse as their regular dress.

Measurements required: 

Back length = 14”. Front length =15 ½”. Mid bust = 36”. Waist = 30”. Shoulder width = 14”. Sleeve length = 8”. Sleeve girth = 11 ½”.

Pattern parts = Back-cut -1(on fold). Front-cut-2(A). Front B- Cut-2. Front C-cut- 4. (waist band or yoke) Sleeve cut-2. Neck bias piece as per neck portion measured.

Suitable materials = Cotton, cambric, poplin, voile, pure silk and artificial silk, synthetic, and crepe fabrics are mostly preferable.

Material required = 1.00 metre, cloth width is 36”

Drafting details of Katori Blouse:

Drafting of Back part of Katori blouse:

Back part of katori blouse
Fig: Back part of katori blouse

1-2 = back length +1/2”
2-3 = bottom fold 1 ½”.
4-1 bust/6-1/2” =5 ½”
5-1 = 14/2-1/2” = 5 ½”.

(due to neck widening shoulder to be decreased and get good fitting at back portion.)

6-5 = draw a line.
8-5 = shoulders strap 2”+1”seam margin.
9-2 = 1/4th waist+1= 8 ½”.
10-1 = back neck drop 7”.
10-11 = 3” as per draft,

join 11 to 8.12-11=1 ¼’.

13-6 = 1 ½”.
14-5 = shoulders slope ¼”.
15 is the midpoint of 9 to 2.
16-15 = dart length is 3 ½.”
17-18 = dart intake is ¾”.

KATORI 3-piece front saree blouse.(A)PART:

Front part of katori blouse
Fig: Drafting of front part of katori blouse

1-2 = bust/3-1/2” = 11 ½.”
1-3 = bust/6-1/2” = 5 ¾”
1-4 = 1/2 shoulder less 1”
4-5 = 5 ¼”.
5-6 = 1/2”down as per draft.
7-2 = bust/12 = 3”
8-3 = bust/12+1/2”(3 ½”) and connect 7 and 8.
9-8 = 1 ½”at 45degree.
10-4 = 2 ½”shoulders strap+1” for seam.
11-10 = draw a line.
12-11 = 1” as per draft.
13-2 = allow side inlays 1 ½”
14-3 = allow side inlays11/2”

Katori Cup Part Cut-4 pieces (B):

Katori Cup Part
Fig: Katori Cup Part

1-2 = Bust/6+1 ½” = 7 ½”.
3-1= same as 1-2.measure.
4-2 = same as 1-3.
5-1 = bust/12+1/2”=3 ½”.
6-1 = bust/8 minus1/4”.
6-7 = bust/12+1/4”=3 ¼”
6-8 = 1” as per draft.
9-2 = bust/12 minus1/2”=2 ½”
9-10 = bust/6+1 ½”=71/2”

11 is the midpoint of 5-10.

11-12 = 1”at 45degree.
13-2 = bust/12minus1/4” =2.3/4”.
14-13 = 3/4” upward.
15-13 = 1.3/4”as per draft.
16-15 = 1.3/4” ’’ ‘’ ‘’.
17-15 = 1”as per draft.
18-17 = 1/2” as per draft
19-7 = 3/4” at 45 degrees as per draft.

Part-C. (Waist Band Or Yoke)-Cut-4:

Waist Band Or Yoke
Fig: Waist Band Or Yoke

1-2 = 1/4TH waist+1” = 8 ½”
1-3 = 2 ½” waist band width.
3-4 = 1/4th waist+1/2”.
5-6 = 1 ¼”as per draft.

7 is the midpoint of 1 to 2 measure.

6-7-2-13 draw as per draft.
10-11=1/2”as per draft.
12-11 = 1 ½” side inlays.
13-2 = 1 ½” side inlays.

Sleeve-Cut-2:

Sleeve Cut
Fig: Sleeve Cut

1-2 = Sleeve length+1/2”.
2-3 = 1 ½”bottom fold.
1-4 = bicep depth, bust/8minus 3/4”.
5-4 = bust/6+1”=7”.
6-2 = sleeve girth/2.
7-8 = 1/2”. out ward.
9-8 = inlays 1 ½”to be kept.
10-5 = inlays 1 ½” to be kept.

11 is mid of 1 to 5 measure.

12-11=1” upward.
13 is the mid of 5 to 11.
14-13=3/4”downward.
10-13-12-1=upper arm sleeve (back side)
10-14-11-1=lower arm sleeve (front side)

Fabric Required = 1.25 metre, cloth width is 36”

Formula = 2. lengths+2. sleeve lengths+4”. c. w = 36”

Suitable fabrics = Cotton, cambric, poplin, crepe, voile, satin, velvet, polyester, synthetic, pure silk, and art silk.

Picture courtesy: http://rosefashion.shopatkerala.com/

More articles published by same author:

  1. Drafting and Cutting Techniques of Dartless Saree Blouse
  2. Viva Questions and Answers for Fashion Design Students and Professionals
  3. Different Types of Traditional Dress in India

Share this Article!

Leave a Comment